Advertisement
TIGERFLEX
APEX LOG CABIN GENERAL INSTRUCTIONS
®
Step 13:
ROOF PANEL INSTALLATION
(MODULE PACKS: K/L & T)
• "Hook" roof panels using purlins into notches pre-cut into apex
gable tops.
(Detail M)
• Roof panels should be flush with outer edges of the logs.
• Use 4x 40mm (S40) equally spaced screws to secure roof panels together
along the purlins.
(Detail M)
• Tie lower edge of roof panels together on both sides of cabin using 190mm spacers.
Secure using 2x35mm (S35) screws per joint.
• Secure roof to walls and gable tops using the following steps:
•
3x 35mm (S35) screws into gable tops.
•
3x 35mm (S35) screws into side walls.
> Top Tip – use a spirit level to draw a guideline for drilling through into walls.
PURLINS
20
tigersheds.com
0113 205 4189
(Detail N)
(Detail P)
(Detail M & P)
(Detail O)
sales@tigersheds.com
M
S35
S35
S40
N
O
S35
P
S35
Advertisement
