Overlay Data command on the Sonar Menu (left). Overlay Data Shown
3. The Data Viewer page will appear with three data categories: Time,
Sonar Data and Sensor Data.
4. Highlight the desired data category and press
pand the list, revealing several subcategories with checkboxes next to
them.
5. Select the desired subcategory and press
checkmark in the checkbox, showing the selected data is set for display.
The Data Viewer menu with Time selected (left). Time-data categories
6. Press
repeatedly to get back to the main display.
EXIT
To change Overlay data size:
1. Press
MENU
2. Highlight the Data Type you want to resize, then use ← → to set the
data to the desired size to one of four options: Off, Small, Medium,
Large and Enormous.
selection menu (right).
are visible (right). Local Time is selected.
|↓ to
O
VERLAY
|
.
D
ENT
ATA
64
, which will ex-
ENT
, which will place a
ENT