Add Fuel; Fill Tank; Adding Fuel To Tank; Engine Operations - Lowrance X510C Operation Instructions Manual

Add Fuel

After entering the amount of fuel added to a tank in the Fuel Added
dialog, the Add Fuel command finalizes the entry of the data. Like the
Fuel Added dialog, the Add Fuel command will only be used when an
amount of fuel is added that does not fill up the tank.

Fill Tank

You will use the Fill Tank command when calibrating a fuel flow and
when filling up the tank without calibration.

Adding Fuel to Tank

Tank Location, Fuel Added and Add Fuel commands work together to
keep NMEA 2000 fuel data consistent with the actual amount of fuel
added to the fuel tank(s).
1. Press
MENU
2. The NMEA 2000 menu will appear with five options: Bus Setup,
Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Back-
light Synchronization. Select
3. Highlight
T
appear with up to three options: Port, Center and Starboard.
4. Select the tank you added fuel to and press
5. Follow the steps below that apply to your tank.
If you filled up the tank:
A. Press the
F
appear: Are you sure you wish to Fill Tank? Press
sage will appear: Do you wish to re-calibrate the device? Highlight
and press
ENT
If you did not fill up the tank:
B. Highlight
box. Use ↑ ↓ , ← → to input the amount of fuel added to the tank and
press . Select the
ENT
message will appear: Are you sure you wish to Add Fuel? Highlight
and press
ENT
6. Press repeatedly to get back to the main display.
EXIT

Engine Operations

The lower half of the Fuel Management menu contains the following
Engine Operation functions: Engine Select, Reset Calibration, Reset
Trip and Reset Seasonal.

Engine Select

Engine Select allows you to choose the desired engine when resetting
calibration, resetting trip fuel and resetting seasonal fuel.
| , select
MENU
and press
L
ANK OCATION
button and press
T
ILL ANK
.
and press
F A
UEL DDED
A
DD
.
and press
NMEA 2000
F M
UEL ANAGEMENT
. The Tank Location menu will
ENT
ENT
to access the
ENT
button and press
F
UEL
94
.
ENT
and press
ENT
.
ENT
. The following message will
. Another mes-
ENT
F
UEL
. The following
ENT
.
N
O
dialog
A
DDED
Y
ES