Oven Thermostat - GASLAND chef Pro GS606MS Installation Instructions Manual

OVEN THERMOSTAT

The numbers printed on the control panel (Fig.3) indicate the increasing oven
temperature value (°F). To regulate the temperature, set the chosen number onto
the knob indicator.
The position BROIL serves only to turn on the broil burner.
Number printed on the control
panel Temperature in °F
WARNING: The oven must be turned off ifit continues to work for 24 hours.
N.B. When the oven is not being used, set the gas knob to the OFF position and
also close the gas shut-off valve placed on the main gas supply line.
IGNITION OF THE OVEN BURNER
The thermostat allows the automatic control of the temperature.
The gas delivery to the oven burner is controlled by a two way thermostatic tap
(oven and broil burners) with flame-failure device.
To light the oven burner operate as follows:
1) Open the oven door to its full extent.
WARNING: Risk of explosion! The oven door must be open during this
operation.
2) Turn the knob to the oven burner (oven burner
temperature adjustment range is MIN to MAX, the knob
can be turned to any position in this range for ignition,
Fig.3), the oven automatically ignites, and it lights
within 5.5 seconds; If it can't be lighted for the first time,
ignite it again after 12 seconds, and it lights within 5.5
seconds; If it can't be lighted after repeating for 3 times,
you need to reset the knob to OFF and then turn it on
again.
3) Once the oven burner has lit, close the oven door slowly and adjust the burner
according to the power required.
If the flame extinguishes for any reason, the safety valve will automatically shut off
the gas supply to the burner.
1 (844) 538-7890
support@gaslandchef.com
GAS OVEN SETTING
MIN
380
430
480
MAX
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
Corresponding temperature in °C
MIN
190
220
250
MAX
08
Fig.3