Kingston Technology IronKey Locker Plus 50 User Manual page 18

 →
USB Cloud Initialization (Windows Environment)
•
Once the installation has completed, you will see an
application box with a list of options to choose from (for
syncing your LP50 data.)
•
Select the cloud option you wish to use as your backup
application and provide the necessary credentials required
for authentication.
•
(Note: If you currently do not have an account set up with
any of the cloud options listed, you may create one at this
time, using your favorite Internet browser, and then
completing this option afterwards.)
•
Once you've chosen a cloud option and authenticated to the
corresponding service, the USB-to-Cloud program will
perform an initial comparison of the data partition against
what is stored in the Cloud. As long as the USB-to-Cloud
service is running in Task Manager, content written to the
data partition will automatically back up (sync) to the Cloud.
USB  → Cloud Usage (Windows Environment)
The USB-to-Cloud application provides the following
additional services:
• Pause Backup (Pauses a data backup).
• Restore (Restores data from the cloud to the device).
• Settings (Additional options for your data backup).
• Exit (Exits the USB-to-Cloud service).
In the 'Settings' menu, you can:
• Change which cloud service app you are currently
using for backups.
• Change the language you are currently using,
• Select which files and/or folders you are backing up
to the cloud.
• Check for software updates.
(Note: If you reset (or format) the LP50 device, all data
on the device will be lost. However, whatever data is
stored in the cloud remains safe and intact.)
Figure 5.3 – Cloud Selection
Figure 5.4- Services Figure 5.5- Settings
17