Usbtocloud - Kingston Technology IronKey Locker Plus 50 User Manual

 →
USB Cloud Initialization (Windows Environment)
Once the device has been initialized in Windows, the USB-to-Cloud application will appear as seen in Figure 5.1 on
the right. Please make sure you have a working Internet connection before you continue.
•
To proceed with the installation, click the green 'Accept'
button in the bottom right-hand corner of the clevX window.
•
To decline the installation, click the red 'Decline' button in
the bottom left-hand corner of the clevX window.
•
(Note: If you click the red 'Decline' button, it will cancel the
USB-to-Cloud installation. In doing so, a special text file
named 'USBtoCloudInstallDeclined.txt' is created on the
data partition. The presence of this file will prevent the
application from prompting you for the installation in the
future.)
•
If the following Windows Security Alert window pops up
during the initialization process, please click "Allow access"
to continue (or create a Windows Firewall Exception) in
order for the USB-to-Cloud application to continue.
Figure 5.1 – USBtoCloud Windows EULA
Figure 5.2 – Windows security alert
16