Lorex L20WD800 Series Network Setup Manual page 14

Setting up remote viewing on the l20wd800 series combo dvr/monitor system

Hide thumbs Also See for L20WD800 Series:

Table of Contents

Lorex Client 4.0 Software - Connection Manager

Adding a Site (Individual Unit Configuration)

NOTE: When entering the information for the IP / DOMAIN NAME:

•

If you are connecting from within your network (i.e. The System and your PC are

both inside your house), you only need to enter the IP address of the System into

the software (i.e. 192.168.0.105)

•

If you are connecting from outside your network (i.e. The System is at Home, and

your PC is at work), use the DDNS Domain Name to configure the software).

Table of Contents