Lorex L20WD800 Series Network Setup Manual page 12

Setting up remote viewing on the l20wd800 series combo dvr/monitor system

Hide thumbs Also See for L20WD800 Series:

Table of Contents

System - DDNS SETUP

Once the DDNS settings have been configured online, the information must be entered on

the System to allow for remote connection via the Lorex Client 4.0 Software (or through

Internet Explorer):

1. Access the Main Menu Setup screens, and

navigate to the SYSTEM option. Press the

ENTER button to access the setup.

2. Navigate to the NETWORK option. Press the

Enter button to access the Network settings.

Select the DDNS Server option, and press the

ENTER button to enter the DDNS SETUP.

3. Enter the information received in email

(including the password). Press the DDNS Status

first - wait for the SUCCESS MESSAGE (as long

as the information is correct).

Select OK to save the settings.

The System will restart to activate the new

configuration.

NOTE: Once all Network settings are configured, the System can be accessed using

the Lorex Client 4.0 Software.

Table of Contents