Settings - Verizon TCL LINKZONE 5G UW User Manual

6.7 Settings

Log in Password
This tab allows you to change the login password. Enter the current and new password
and then click Apply to save the changes.
Universal Charging
You can charge other devices such as phone or tablet through the USB-C port using
your LINKZONE. You can select the battery percentage to configure when you want to
stop charging other devices. Click Apply to save the settings.
Backup & Restore
This feature allows you to back up the current device configuration, or restore the device
to a previous configuration by importing the backup configuration file.
To back up the current device configuration, enter Admin password and click Apply.
NOTE: You will be locked out if the password is entered incorrectly for 5 times.
To restore the configuration to previous settings:
1. Enter the admin password in the Admin password field.
2. Click Browse in the Select a file field to select a file downloaded from your
computer.
3. Click Restore. The configuration is restored to previous settings.
NOTE: Restoring settings will disconnect devices from the network and reset network
names and passwords.
Restart & Reset
This function enables you to restart or factory reset the LINKZONE.
If the LINKZONE does not work properly, you can try restarting the LINKZONE to solve
the problem.
If you can't access the internet for unknown reasons, or forget the login password, you
can restore the LINKZONE to factory settings. To reset the LINKZONE, press the sharp
end of an unfolded paperclip in the reset hole for 3 seconds. The reset hole is located
near the Ethernet port.
Advanced Settings
Ethernet & USB
This option allows you to enable or disable Ethernet and USB tethering.
LAN
The default gateway address is 192.168.1.1, and the default subnet mask is 255.255.255.0.
With the DHCP server function enabled, IP addresses will be assigned automatically to
23