Verizon TCL LINKZONE 5G UW User Manual page 19

Encryption
Wi-Fi Password
If you move the slider to turn Wi-Fi off and click Apply, and then Wi-Fi is disabled. All
connected devices over the Wi-Fi network will be disconnected from the network.
Band Selection
When Wi-Fi is enabled, you can select an appropriate band for your device. Each network
can be accessed over 2.4 GHz and 5 GHz.
• The 2.4 GHz band transmits over longer distances and travels through walls better,
but delivers slower speed;
• The 5 GHz band provides faster speed with reduced interference, but it doesn't pass
through walls as easily as 2.4GHz.
Advanced
Your LINKZONE offers advances Wi-Fi settings for users with technical expertise.
Configure advanced Wi-Fi settings in this option.
Max. connected
devices
Wi-Fi mode
AP isolation
Channel bandwidth
Channel
NOTE: When you select 2.4 GHz only in the WiFi Basic page, 5 GHz option will be
disabled on this tab.
Guest Network
In this tab, you can enable or disable the Guest Network feature, and configure guest
network Wi-Fi name, Wi-Fi password, security method, and validity duration. After setup
is complete, click Apply to save settings. Devices connected to the guest network can
access the internet, but cannot access the LINKZONE web UI or the primary network.
The available option is AES.
Check the Wi-Fi password in this item.
You can decide how many client devices can connect to your
LINKZONE network at a time.
The mode is set to 802.11 ax by default. The available options
include 802.11 ax, 802.11 ac, 802.11a, 802.11n, and 802.11 b/g.
The AP isolation function enables you to create a separate
virtual network for each wireless client that is connected to your
LINKZONE network. When this function is enabled, all wireless
devices in the network will not be able to communicate with each
other.
Select the available options from the drop-down menu.
The channel default option is Auto. The LINKZONE will select the
best channel automatically.
19