COMPX Pearl KEYPAD Installation Instructions Manual page 4

KEYPAD version
Pearl
– installation instructions
Electronic push button cabinet lock
Programming – Introduction
Pearl is easy to program and operate.
Type the user code (factory default
1234) and press
or lock the cabinet.
The supervisor can change operating
codes, modes and restore lock
settings. While Pearl is easy to program,
we highly recommend reading the
Indicator Lights
Green:
Indicates button
input and valid
code
Yellow:
Indicates low
battery or
program mode
Red:
Indicates
incorrect entry
4
(enter) to unlock
(clear) button and
erases any key input
made in error
is the enter button
and is used to
complete code and
begin programming
Pearl — Installation instructions: KEYPAD version
complete programming instructions
prior to making any changes. Remember
to keep track of any programming
changes.
Button locations, indicator lights and
knob referenced in the programming
instructions are shown below.
Knob is always
rotated clockwise
to unlock and
counter clockwise
to lock