Enable The Alarm (Optional) - King Quest VQ4100 Owner's Manual

Use this procedure to enable the alarm.
You can enable or disable the alarm at any time using this procedure.
This antenna is factory preset for MODE 1.
• DIRECTV Service
To enable the alarm, follow the instructions on page 11 to choose MODE 5.
• DIRECTV Service
When enabled, the alarm will sound if the coax is disconnected from the antenna.
• Alarm also sounds if coax is disconnected from power inserter.
Page 10

ENABLE THE ALARM (OPTIONAL)

HOW THE ALARM WORKS
• Alarm disabled
• Alarm enabled
KC1261