Table of Contents
Advertisement
AS-Interface Analyser
5.3.5
Configuration
The tab "Configuration" shows for each slave the current configuration data stored
in the slave: I/O configuration, ID code, ID1 and ID2 code.
Fig. 6:
Configuration of the used net: The slaves 4A, 4B, 5, 6, 8 and 10 are slaves according
to specification 2.1, slaves 5 and 6 are safety slaves, 8 and 10 are analog slaves.
These data serve for the identification of the different types of slave. It can be con-
cluded from the absence of the values for ID1 and ID2 that a slave according to
specification 2.0 is concerned. This means this is no slave according to specifica-
tion 2.1. If ID1 and ID2 are missing for all slaves, this can mean that the net is ope-
rated from a master according to specification 2.0. Older masters do not call ID1
and ID2.
Subject to reasonable modifications due to technical advances.
SIEMENS AG · Low-Voltage Controls · Phone +49 911 895 59 00 · Fax +49 911 895 59 07 · Internet: http://www.siemens.com/lowvoltage/technical-assistance
Functions of the Analyser
s
Printed in Germany
18
Advertisement
Table of Contents
