Repeater Cover - Furuno VR-5020 Modification Instruction

2-1. How to remove the repeater box from the barrel housing cover
Unfasten four screws (M3) from
the repeater box.
Unfasten two screws (M4) from
the cable fixing plate. Disconnect
the cable. Remove the repeater
box from the barrel cover.
(Discard the repeater box.)
2-2. How to remove the repeater box from the barrel cover
Black type: 6G serial number 7127 or greater, 9G serial number 7366 or greater)
Remove the six screws (M3) from the
repeater box, and remove the cover.
Note: Mark the direction of cable entry
inside the barrel cover.
Repeater box
Note: Mark the direction of cable entry
inside the barrel cover.

Repeater cover

Insert minus driver into
the groove shown
3