The Comfort Inception Cushion (Inception) is a custom-made, ready-to-use, wheelchair seating surface that is constructed as prescribed to meet the needs of a specific user in a specific wheelchair. The Inception must be properly sized and configured to the individual and must be used with a compatible cover.
Page 5
- DO NOT use the air insert inflation valve as a others. handle for carrying or pulling the cushion. Carry - The Inception has not been tested for use in a motor the cushion by the cushion base or by the carrying vehicle.
Support. Standard Anti-Thrust Growth Kit WARNING: The Inception may have been ordered to include a Standard Anti-Thrust Growth Kit (CD-AT-STND-GROWTH-KIT), which is foam pieces that can be removed and replaced as prescribed. The foam pieces must be correctly aligned and secured in the cushion. Skewed, loose, or other incorrect placement of the foam pieces may reduce or eliminate the benefits of the cushion, increasing the risk to skin or to other soft tissue.
(and beneath the Incontinence Liner, if using) and inside the cover. If using the ATI, refer to the instructions provided with the ATI for placement and adjustment. Coverings - Installation and Removal Covering(s) for the Inception that WARNINGS: includes a ROHO Air Insert: - Risk of falling: The bottom of the Incontinence Liner is slippery;...
Inception Operation Manual Rigid Insert (Removable Version) WARNINGS: Removal: Have the user transfer off the cushion. Unzip the cover. Remove the Rigid Insert. - Follow these instructions for the correct placement of the Rigid Insert. Place the Replacement: Rigid Insert inside the cover and beneath 1.
Page 9
Inception Operation Manual ROHO Air Insert Setup, continued IMPORTANT! Before following these instructions, read the safety information on the previous page. See also "ROHO Air Insert Placement and Removal" in this manual. 1 Inflate the air insert: Suggestion: transfer off the air insert before inflating.
Inception Operation Manual Cleaning and Disinfecting WARNINGS: - Follow all manufacturer bleach container and germicidal disinfectant safety guidelines. - Cleaning and disinfecting are separate processes. Cleaning must precede disinfection. If the product becomes soiled: clean, disinfect, and check the product for proper functioning.
Inception Operation Manual Cleaning and Disinfecting, continued ROHO Air Insert WARNINGS: - Cleaning and disinfecting are separate processes. Cleaning must precede disinfection. If the product becomes soiled, clean, disinfect, and check the product for proper functioning. - DO NOT allow water or cleaning solution to enter the air insert. Make sure the inflation valve is closed.
- Not every Inception is contoured. Each Inception is uniquely constructed. - If the cushion is uniform in shape, orient as prescribed for the user and the wheelchair. - Some Inception cushions include a dark foam layer on the bottom. The air insert slides Make sure the air insert is correctly attached to the cushion and that the hook and loop on the cushion.
Permobil DME supplier, distributor or retailer. be commenced within that time. Permobil shall not Whenever possible, the DME supplier, distributor be responsible for any incidental or consequential...
Page 16
1960 South Calhoun Rd. New Berlin, WI 53151 USA permobil.com OM-INCEPTION-AMR 2021-04-14...