Advertisement
The actual length of the "long" screws to attach the fan and or filter will vary depending on the
depth of the particular shipment of fans we happen to get that month. They won't be hard to
spot since they'll be the longest thing in the bags.
Note that you'll need a 3mm hex wrench for most screws. We don't include one in the kit since
they invariably end up in a drawer or landfill. Anyone with a 3D printer should invest in a nice
metric hex wrench set since many adjustments will be made along the way.
Finally, and we can't stress this enough: DON'T OVERTIGHTEN THE SCREWS
Leave the screws a little loose until the end adjustment phase. You'll be hand-tightening until
the screws are snug during that process, but you can easily use so much force on the plastic
pieces or the acrylic crack. Please don't be that guy.
Copyright 2022 3DUpfitters
7
Advertisement
