Advertisement
Confirm the fan's direction by plugging it into a USB
power supply before attaching the filter. The round label
should be on the outside.
The fan should be attached to the outside of the
enclosure.
The fan should be oriented to pull air OUT of the
enclosure.
Use the long screws included in the fan packet to attach
the fan. The length of the screws may change
depending on the depth of this particular shipment of fans.
If attached to the Charcoal Air Filter, follow the directions included with that product.
At the bottom is a slit for the grommet
and
grommet holder. The grommet is used
to get the power cable and other cables
into the enclosure. Once the wires are
through the grommet, you can lift the
pen off without unplugging anything.
Now attach the back to the assembled
left and front panels, which should look
like the illustration to the right.
Copyright 2022 3DUpfitters
12
Advertisement
