Axis ExCam XF Q1645 User Manual page 9

ExCam XF Q1645 Explosion-Protected Network Camera
Configure your device
Optimize the image for traffic surveillance
To get the best possible image for traffic surveillance, use the AXIS Traffic Wizard in combination with the Traffic overview scene
profile.
1. Go to Settings > Apps > AXIS Traffic Wizard.
2. Start the application if it is not already running.
3. To set up the application, click Open.
4. Select units (metric or imperial).
5. Enter the values for Road distance, Camera height, Vehicle distance and Max speed.
6. To make both dark and bright areas of the image visible, turn on WDR.
7. Set the level of low-light gain depending on the light conditions.
8. If external IR illumination is available, select the Supplemental IR illumination checkbox.
9. Click Save.
10. Go to System > Orientation.
11. Select Traffic overview under Scene profile.
12. Click Done.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
Image without WDR.
Image with WDR.
9