Axis ExCam XF Q1645 User Manual page 10

ExCam XF Q1645 Explosion-Protected Network Camera
Configure your device
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Video > Image > Wide dynamic range.
2. Turn on WDR.
3. Use the Local contrast slider to adjust the amount of WDR.
4. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
Hide parts of the image with privacy masks
You can create one or several privacy masks to hide parts of the image.
1. Go to Video > Privacy masks.
2. Click
3. Click the new mask and type a name.
4. Adjust the size and placement of the privacy mask according to your needs.
5. To change the color for all privacy masks, expand Privacy masks and select a color.
See also Privacy masks on page 17
Add street names and compass direction to the image
Note
The street name and compass direction will be visible on all video streams and recordings.
1. Go to Apps.
2. Select axis-orientationaid.
3. Click Open.
4. To add a street name, click Add text and modify the text to fit the street.
5. To add a compass, click Add compass and modify the compass to fit the image.
Replace the lens
1. Stop all recordings and disconnect power from the product.
2. Disconnect the lens cable and remove the standard lens.
3. Attach the new lens and connect the lens cable.
4. Reconnect the power.
5. Log in to the product's webpage, go to the Image tab and then select the P-Iris lens you have installed.
Note
If you use a DC iris lens, select Generic DC Iris.
.
10