Table of Contents
Advertisement
Discrete 2 of 5
Enable/Disable Discrete 2 of 5
Set Lengths for Discrete 2 of 5
Lengths for D 2 of 5 may be set for one discrete length or lengths within a specific range. The
length of a code refers to the number of characters (i.e., human readable characters) the code
contains, and includes check digits. (Numeric barcodes are at the end of this manual. If you make
an error, or wish to change your selection, scan the CANCEL barcode. Single digit numbers must
always be preceded by a leading zero.)
One Discrete Length
- This option allows you to decode only those codes containing a selected length. For example, if
you scan D 2 of 5 One Discrete Length and then scan 1, 4, then the only D 2 of 5 symbols
decoded are those containing 14 characters.
Length Within Range
- This option allows you to decode a code type within a specified range. For example, to decode
D 2 of 5 symbols containing between 7 and 12 characters, first scan D 2 of 5 Length Within
Range. Then scan 0, 7, 1 and 2.
14
Advertisement
Table of Contents
Need help?
Do you have a question about the LK7000 and is the answer not in the manual?