(5.1) Changing V.shad. (Vertical Shading) Correction Mode; (5.2) Changing The Manual V.shad. (Vertical Shading) Correction Setting; (5.3) Changing C.shad. (Corner Shading) Correction Mode; (5.4) Changing The Manual C.shad. (Corner Shading) Correction Setting - Canon JCT-TF5G Instruction Manual

(5�1) Changing V�SHAD� (Vertical Shading) correction mode
① Move the " " to V.SHAD by pushing [MENU UP], [MENU DOWN] buttons.
② Select the V.SHAD. mode setting by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The alignment value for vertical shading is fixed to "0" when selecting V.SHAD. OFF.
MANU is not displayed in the menu.
(5�2) Changing the manual V�SHAD� (Vertical Shading) correction setting
① Move the " " to MANU by pushing [MENU UP], [MENU DOWN] buttons.
② Adjust the MANU V.SHAD. by pushing [DATA UP], [DATA DOWN] buttons.
(5�3) Changing C�SHAD� (Corner Shading) correction mode
① Move the " " to C.SHAD by pushing [MENU UP], [MENU DOWN] buttons.
② Select the C.SHAD. mode setting by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The alignment value for corner shading is fixed to "0" when selecting C.SHAD. OFF.
MANU is not displayed in the menu.
(5�4) Changing the manual C�SHAD� (Corner Shading) correction setting
(a) Changing the red size setting
① Move the " " to R SIZE by pushing [MENU UP], [MENU DOWN] buttons.
② Adjust the R size by pushing [DATA UP], [DATA DOWN] buttons.
(b) Changing the red gain setting
① Move the " " to R GAIN by pushing [MENU UP], [MENU DOWN] buttons.
② Adjust the R gain by pushing [DATA UP], [DATA DOWN] buttons.
(c) Changing red position setting
① Move the " " to R POSI by pushing [MENU UP], [MENU DOWN] buttons.
② Adjust the R position by pushing [DATA UP], [DATA DOWN] buttons.
(d) Changing blue size setting
① Move the " " to B SIZE by pushing [MENU UP], [MENU DOWN] buttons.
② Adjust the B size by pushing [DATA UP], [DATA DOWN] buttons.
(e) Changing blue gain setting
① Move the " " to B GAIN by pushing [MENU UP], [MENU DOWN] buttons.
② Adjust the B gain by pushing [DATA UP], [DATA DOWN] buttons.
(f) Changing blue position setting
① Move the " " to B POSI by pushing [MENU UP], [MENU DOWN] buttons.
② Adjust the B position by pushing [DATA UP], [DATA DOWN] buttons.
26
2B996-016JA