(1.2) Changing The Setting In Ss (Synchro. Scan) Mode - Canon JCT-TF5G Instruction Manual

(1�2) Changing the setting in SS (synchro� scan) mode
Move up down
by pushing
MENU UP, DOWN
SHUTTER
MODE
SS
PART
<MODE = SS>
(a) Changing the shutter speed setting
① Move the " " to SS by pushing [MENU UP], [MENU DOWN] buttons.
② Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.
(b) To change the settings for partial scanning
① Move the " " to PART by pushing the [MENU UP] and [MENU DOWN] buttons.
② Select the mode you want by pushing the [DATA UP] and [DATA DOWN] buttons. (When ON or EXT is set)
③ Move the " " to the setting item you want by pushing the [MENU UP] and [MENU DOWN] buttons.
④ Select the setting values you want by pushing the [DATA UP] and [DATA DOWN] buttons.
* If PART is set to OFF, the setting values for partial scanning are not shown.
Note:
The slow shutter speed may increase the fixed pattern noise and/or the white pixels. This is not a symptom of
malfunction.
Select the desired
value by pushing
DATA UP, DOWN
SS
OFF
OFF
• Shutter mode MANU, SS, E.TRG, AUTO
• Synchro. scanning setting
refer to the item "7.3 Synchro. Scan Operation".
• Turning partial scanning on/off
OFF : Partial scanning is off
ON : Partial scanning is on
You can set the area for partial scanning.
See "7.5 Partial Scanning".
EXT : You can switch between ON and OFF by using
external controls.
18
2B996-016JA