Table of Contents
Advertisement
7� MODE SETTING BY ON SCREEN DISPLAY
Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The contents
once set are memorized even if the power source is turned off, so it is unnecessary to set again when using the unit
next time. When the setting is performed, select the menu of the item to be set. (Use a monitor that can display720 x
540 pixels or higher.)
7� 1
Using the Menus
When the power is turned on, the normal screen showing only the video signal appears. Change the output to each
screen (video signal output, Index menu, and menus) by using the [DISP], [PAGE], [MENU UP], [MENU DOWN],
[DATA UP], and [DATA DOWN] buttons.
* A menu is selected when pushing the [PAGE] button after moving the " " on the screen by the [MENU UP], [MENU
DOWN] button while the Index menu is displayed.
POWER ON
Video signal output
DISP
PAGE
SHUTTER
GAIN
MANU
MANU
PAGE
SS
OFF
E. TRG
1P SR
E. TRG
PW SR
E. TRG
RR
AUTO
7� 2
Menus
• Select the menu to change the setting by referring to the item "7.1 Using the Menus" .
• When the [MENU UP], [MENU DOWN] buttons are pushed, the " " on the screen moves up and down.
Move the " " to the item whose setting you wish to change.
Note:
When partial scanning (see page 29) is selected, if you open the content screen or setting screen, the signal
changes to FVAL, LVAL, and DVAL, the same as for all pixels scanning.
When E.TRIG is selected, if you open the content screen or setting screen, the mode changes to internal sync.
When you close the screen display, and return to the video signal screen, operations are done in the set mode.
Index menu
DISP
PAGE
WHT BAL
PAGE
AWB
PAGE
MANU
DISP
Menues
SHADING
PROCESS
GAMMA
V.SHAD.
PAGE
OFF
MANU
GAMMA
V.SHAD.
ON
OFF
C.SHAD.
PED
MANU
MANU
C.SHAD.
NR
OFF
15
2B996-016JA
SYNC
OPTION
INT
PAGE
PAGE
EXT
OUTPUT
PAGE
BAUD
RATE
Advertisement
Table of Contents
