3� Names And Functions - Canon JCT-TF5G Instruction Manual

3� NAMES AND FUNCTIONS
[ Front ]
10
[ Bottom ]
① Prism faceplate
② DISP button
③ PAGE button
④ MENU UP button
⑤ MENU DOWN button
⑥ DATA UP (AWB) button
⑦ DATA DOWN button
⑧ DIGITAL terminal
⑨ DC IN 12V terminal
⑩ Mounting holes M3
⑪ Mounting holes M2
1 Prism faceplate
DC IN 12V
3 PAGE button
11
The protection cap is attached on the lens mount portion. After removing the cap,
mount the lens. Be careful not to scratch or touch the optical area.
Used when switching the display.
Used when switching to the menu and when selecting the menus.
Select the function to be confirmed or changed on the menu.
Select the function to be confirmed or changed on the menu.
Changes the value of the function selected by the MENU (UP/DOWN) button. (Also
used when using AWB.)
Changes the value of the function selected by the MENU (UP/DOWN) button.
8-bit RGB, digital signal, and sync signals are output in the Camera Link format.
Trigger signal and external sync signal (HD, VD) are inputs.
Mode switching signal for partial scanning is input.
Accepts serial communication control signals and a DC power input (12V).
Accept a DC power input (12V).
Used to mount the camera.
Used to mount the camera.
(AWB)
DISP
MENU DATA
PAGE
[ Rear ]
10
2B996-016JA
9 DC IN 12V terminal
2
DISP button
4 MENU UP button
6
DATA UP (AWB) button
7
DATA DOWN button
5 MENU DOWN button
8
DIGITAL terminal