4 ) Process; (4.1) Changing Gamma Correction; (4.2) Changing Master Pedestal; (4.3) Changing R Pedestal - Canon JCT-TF5G Instruction Manual

( 4 ) PROCESS

• Gamma Correction (GAMMA)
Select either OFF or ON of Gamma Correction.
• Master Pedestal (M. PED)
Adjust the Pedestal level of each RGB.
• R Pedestal (R. PED)
Adjust the Pedestal level of Red.
• B Pedestal (B. PED)
Adjust the Pedestal level of Blue.
• Noise Reduction
Select either OFF or ON of Noise Reduction.
Move up down
by pushing
MENU UP, DOWN
PROCESS
GAMMA
M.PED
R.PED
B.PED
NR
(4�1) Changing gamma correction
① Move the " " to GAMMA by pushing [MENU UP], [MENU DOWN] buttons.
② Select the gamma correction by pushing [DATA UP], [DATA DOWN] buttons.
(4�2) Changing master pedestal
① Move the " " to M. PED by pushing [MENU UP], [MENU DOWN] buttons.
② Adjust the master pedestal by pushing [DATA UP], [DATA DOWN] buttons.
(4�3) Changing R pedestal
① Move the " " to R. PED by pushing [MENU UP], [MENU DOWN] buttons.
② Adjust the R pedestal by pushing [DATA UP], [DATA DOWN] buttons.
(4�4) Changing B pedestal
① Move the " " to B. PED by pushing [MENU UP], [MENU DOWN] buttons.
② Adjust the B pedestal by pushing [DATA UP], [DATA DOWN] buttons.
(4�5) Changing noise reduction
① Move the " " to NR by pushing [MENU UP], [MENU DOWN] buttons.
② Select the noise reduction by pushing [DATA UP], [DATA DOWN] buttons.
Select the desired
value by pushing
DATA UP, DOWN
OFF
0
0
0
OFF
• Gamma correction ON/OFF
• Master pedestal adjustment -64 to 64
• R pedestal adjustment -64 to 64
• B pedestal adjustment -64 to 64
• Noise reduction ON/OFF
24
2B996-016JA