Buttons And Windows In The Fuu Firmware Upgrade Utility - DIS DCS-6000 Upgrade Manual

Danish Interpretation Systems

Buttons and windows in the FUU Firmware Upgrade Utility

'Upgrade CU firmware buttons'
Press those buttons to upgrade the
firmware in the CU: 'Upgrade PPC'
& 'Upgrade DSP'.
'Status window'
This window shows the status and
give messages to the user
'CU window'
Those windows shows 'Type',
'Serial number' & 'Firmware
version' ('PPC' & 'DSP' version)
of the CU.
'Present Units window'
All units present in the system are
shown in this window
'S
elected Units window'
Unit, which are selected for
upgrading are shown in this window
"Select unit type" button
Press this buttons to add all units of
the type of units selected in the drop
down window.
"Select unit" buttons
Select one of the units in the
'Present Units window' and press
the 'Add unit button' to add
'Selected Units window'.
'Remove buttons'
Press those buttons to either remove
a selected unit or to remove all units
from the 'Selected Units window'
'Update status button'
Press this buttons to update the
status of the units connected
'3a Upgrade Units button'
Press this button to upgrade the
units present in the 'Selected
Units window'
Manual 01 18 04500
Firmware Upgrade Manual
'Command line' button
Press this Icon to get a window
for sending commands to the
CU
'3b Set Feature Id'
Press this button change the
Feature setting for the selected
units
19