Feature Id; How To Set Feature Id - DIS DCS-6000 Upgrade Manual

Digital conference system firmware upgrade & feature license key import manual

Hide thumbs Also See for DCS-6000:

Table of Contents

Danish Interpretation Systems

The popup 'Import License

key' will now show.

Use the browse button to

select the License Key file

Press OK.

The new license key will

then be imported.

After successfully having

imported the license key, you

will be notified to restart the

CU 6010.

Note:

The information fields will

shown the functionality

included in the license key

Feature ID

For some units it is possible to set (or change) a hardware feature Id.

It is possible to enable/disable the use of the loudspeaker in the conference units.

It is especially important when using MU 604x units in voice active mode. If this mode will be used it is

therefore advisable to enable/disable the use of the loudspeaker depending on if the loudspeaker is in use not.

Connect the laptop to the CU

6010 using the RS 232 serial

interface cable and switch

ON the CU 6010

Start DCS 6000 Firmware

Upgrade Utility (FUU) by

clicking the Icon.

Manual 01 18 04500

Firmware Upgrade Manual

Table of Contents