Wall Transformer Operation - Listen Technologies LR-300 User Manual

LR-300 Wall Transformer Operation
The LR-300 will operate normally when connected to a wall transformer. Use Listen
part number LA-202, available from any Listen dealer. Connect the wall transformer
to the jack on the side of the LR-300 marked "PWR/CHG" and plug the wall
transformer into a grounded AC outlet.
You do not need to have batteries installed in the LR-300
to operate it with a wall transformer.
NOTE: If batteries are in the unit ensure that the battery
selection switch is set properly as shown on
page 60. Please review the information on
page 65 for important information regarding
battery type and charging.
The LA-202 wall transformer
plugs into the side of your
portable transmitter or receiver.
www.listentech.com
67