Operation Instructions - Listen Technologies LR-300 User Manual

LR-300 Operation Instructions
5
To Lock into Only One Channel
Press and hold the SEEK button for 5 seconds to lock a receiver onto the currently
tuned channel. Press and hold the button again to unlock. When locked the LED
on top of the unit will flash when you press the SEEK button.
IMPORTANT
: Because the LR-300 has no LCD display, it is important to recognize
64
when the unit is locked on a channel. If the unit sounds distorted or
there is no audio heard and pressing the seek button does not
correct the problem, the unit is probably locked on the wrong
channel. Press and hold the seek button for 5 seconds to unlock.
If locked, LED flashes on all If locked, LED flashes on all
portable receivers when SEEK
button is pressed.