LR-400 Setup Instructions
7
Turn the Unit On
Receivers are turned on by rotating the volume dial counterclockwise. The red
LED on top of the unit should activate and the LCD display should illuminate. If
they do not, make sure you have installed the batteries correctly and that you
are using fully charged batteries.
8
Select Channel(s)
See page 73 for complete channel
selection information.
9
Set Squelch
See pages 43 and 44 for squelch and
programming information.
40
Earphone/Headset jack
Earphone/Headset jack
LCD display will
activate when on
Red LED will illuminate when on
Turn volume knob
Turn volume knob
counterclockwise
to turn on
www.listentech.com