Advertisement
Available languages
Available languages
User manual / Bedienungsanleitung
4. Operating controls
1
Pic. 5: Front view of the
balance V2
1
Headphone output
When you connect headphones, the outputs on the rear of the phono stage will be deactivated
automatically. Similarly the 'mode' switch on the underside will have no function in this instance.
2
Volume control
When „mode" on the underside is set to „variable" this knob can be used to adjust the volume.
3
On/Off/Mute function:
• After switching the unit on at the mains supply on the rear side, you then need to activate the
phono stage by pressing this button.
>> The LED of the button (3) will go off and the LED of the volume knob (2) will be illuminated.
• To activate the „mute function" press the button (3) again.
>> Both LEDs will start to blink.
• To deactivate „mute function" press the button (3) again.
>> The LED of the button (3) will go off again and the LED of the volume knob (2) will be
illuminate again.
• To activate the standby mode, press the button (3) and hold it for 2-3 seconds.
>> The LED of the button (3) will now be illuminated and the LED of the volume knob (2) will
go off.
To switch off the device completely (to avoid unnecessary standby consumption if it will
not be used for a long period of time) we recommend using the main switch on the rear.
Made in Germany
2
phono stage
3
Page / Seite 9
Advertisement
