Advertisement
Available languages
Available languages
User manual / Bedienungsanleitung
4
Variable function
The „mode" button in the „variable" positon (not pressed) unlocks the gain setting, which means
that the volume can be adjusted using the front volume knob.
In the „fix" option („mode" button pressed), the volume knob is deactivated and the
plays at maximum volume.
In this case you can control the volume using other components in your hi-fi system.
Please note:
To protect your loudspeakers from any damage, please make sure that your power
amplifier(s) are always switched off when you are connecting the interconnects to or
balance V2
from the
Before adjusting any settings, be sure to switch off the power of the
the switch on the rear panel of the power supply.
3. Getting started
1. Switch off all of your hi-fi system components and connect your
2. Follow the set-up adjustment steps described above according to your components.
3. For perfect sound, without interference, we recommend not to stack the two components of the
balance V2
, just to put them side by side.
balance V2
4. Connect the
5. Connect the power supply to the mains supply and switch the unit on (Pic. 2).
3
Pic. 3: Rear view of the
balance V2
Details of connections on rear of the
1
Balanced output XLR
Both outputs are activated and ready to use at the same time.
2
Unbalanced input RCA
Selection must be set manually using the „input selector" on the underside.
3
Balanced input XLR
Selection must be set manually using the „input selector" on the underside.
Made in Germany
phono stage.
with the 15-pin Sub-D connector to the power supply unit (Pic. 2).
5
4
1
2
phono stage
balance V2 phonostage
balance V2
4
1
2
(Pic. 3).
balance V2
balance V2
using
phono stage.
3
Page / Seite 7
Advertisement
