The Clearaudio Balance V2 - Clearaudio balance V2 User Manual

User manual / Bedienungsanleitung
2. Set-up adjustments
To ensure the best possible channel separation, the left and right channels are entirely separate in
balance V2
the . All switches are therefore duplicated for the left and right channels.
Please make sure that both corresponding switches are always in the same position.
1
Pic. 2: Underside view of the
Details of the adjustment and control options on the underside (Pic.1).
1
Gain (Selection of MM/MC cartridge mode)
• MM operation: Both 'gain' buttons in „off" position (load impedance = 47kOhm)
• MC operation: Both 'gain' buttons in „on" position (load impedance = 500Ohm)
2
Input selector (selction between balanced / unbalanced mode)
• Balanced / symmetrical operation: Both buttons in „off" position
(use balanced XLR interconnects for input)
• Unbalanced / unsymmetrical operation: Both buttons in „on" position
(use unbalanced RCA / cinch interconnects for input)
3
Subsonic filter
• Subsonic filter on: Both „subsonic off/on" buttons in „on" position
• Subsonic filter off: Both „subsonic off/on" buttons in „off" position
Page / Seite 6
3 4
2
balance V2
phono stage
3
2
© clearaudio electronic GmbH, 2022-10