Visca - Axis Q16 Series User Manual

AXIS Q16 Network Camera Series
PTZ drivers
AutoIris
AutoFocus
IrCutFilter
BackLight
OSDMenu
Connection
For the RS485/RS422 pin assignment on your device, see RS485/RS422 connector on page 31.
To change serial port settings, go to System > Plain config > Serial in the device interface.

Visca

This is a list of models supported by this driver. The physical installation depends on your Axis product and the PTZ unit.
Important
Check what serial communication your Axis product and the PTZ unit will support.
Supported models with RS422 4-wire interface:
• Sony EVI-D70/D70P
• WISKA DCP-27 (PT-head)
Supported models with RS232 interface (may require external RS422-4-wire/RS232 converter):
• Axis EVI-D30/D31
• Sony EVI-G20/G21
• Sony EVI-D30/D31
• Sony EVI-D100/D100P
• Sony EVI-D70/D70P
Other models may be supported but this has not been verified by Axis.
Technical information
DEFAULT capabilities for PTZ driver:
Driver
Version
DEFAULT serial configuration:
PortMode
BaudRate
DataBits
StopBits
Parity
DEFAULT supported capabilities in this PTZ driver:
yes
yes
no
yes
yes
Visca/EVI
4.11
RS422
9600
8
1
None
35