AXIS Q16 Network Camera Series
Specifications
Buzzer
Fast interval
Medium interval
Slow interval
Status LED behavior and buzzer signal for leveling assistant
For information on the function button used for leveling the camera, see page 29.
Press and hold the function button (2) for more than two seconds to level the camera.
•
When the camera is level, both LEDs are steady green, and the beep is continuous.
•
When the camera is not level, the LEDs flash a combination of red, green and orange, and the beep occurs at slow intervals.
Both LEDs briefly flash green to indicate that the leveling is getting better.
Status LED behavior and buzzer signal for leveling assistant
For information on the function button used for leveling the camera, see page 29.
Color
Fixed green
Flashing green
Flashing orange
Flashing red
SD card slot
NOTICE
NO
NO
TICE
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
•
Resetting the product to factory default settings. See Reset to factory default settings on page 23.
Buzzer
Continuous beep
Fast beeps
Medium beeps
Slow beeps
Lens
Optimally adjusted
Less optimally adjusted
Poorly adjusted
29
Camera position
Level
Almost level
Not level
Far from level