Page 1
VC9E31 model / 型号 Penyedut Habuk Robotik Robotic Vacuum/智能扫地机/ Instruction Manual / Buku Panduan 说明指示书/ Important / Mustahak 重要/ Please read this manual carefully before operating this product. Keep this manual handy for further reference. 请在使用此产品前,详读此说明书。并将之收藏以作日后参考。 Sila baca buku panduan ini dengan teliti sebelum menggunakan produk ini. Simpanlah untuk rujukan masa depan.
16. Before each use, please clean the inner and suction mouth of the dust container, clean out the hair, 18. Use only the charger supplied by KHIND. If other chargers are used, this can cause damage to the cotton fibre and dust. Do not jam the suction of the dust container.
Page 3
Water Tank and Mopping Cloth Cleaning & Maintenance Use water to clean the Mopping Cloth. Press the Water Tank release button to pull it out. Always remove the plug from socket-outlet when not in use, before cleaning or maintaining the appliance. For optimal performance, follow the instruction below to clean and maintain the robotic vacuum regularly.
C. Dust Box Dust Box Side Brushes Foreign substances, such as hair, can easily get tangled in the side brushes 16. High Efficiency Strainer and dirt adhere to them. Be sure to clean them regularly 17. Primary Filter Strainer Remove the side brushes 18.
Speci cations How To Use Product Usage (Preparation) Model VC9E31 Before using the Robot, remove the protective strip on the Robot and Charging Dock Power Remove Protection Adaptor Input Voltage AC100-240V~ 50/60Hz Remove the Remove Adaptor Output Voltage 0.6A protective strip...
Page 6
5. Manual Cleaning Product Usage (Select Cleaning Mode) 1. Auto Cleaning • You can direct Robot to clean a particular area by using the directional buttons on the • Robot Optimizes its cleaning path by selecting different cleaning modes automatically until Remote Control.
Page 7
Mopping / Water Tank Scan to download APP ( TUYA Smart ) Please read this manual carefully before use and follow the Quick Guide during operation for safety. • Do not use mopping function with any carpet floor. Please make sure that your robot, router and phone are close to each other before starting APP connection. •...
Page 8
Click Confirm Indicator Rapidly Blink and press “Next” to connect your device (Fig 5) After a voice prompt “Wifi Connected”, adding device “Khind VC9E31” to your TUYA app is complete. You can rename your device, eg. My Khind Robot (Fig 6)
Page 9
Fig 14 Fig 15 Fig 16 Start / Pause / Standby / Sleeping mode, Working Map and Cleaning Record Fig 20 Fig 21 Fig 22 14. Press “ ” / “ ” to start / pause the robot (Fig 14) •...
Trouble Shooting Prompt Tone Cause of Failure Solution Robot off ground Robot suspended Please put the Robot back to the ground and press the cleaning key again Dust box removed Return the dust box to the Robot and press the Dust container and not installed cleaning key again...
Need help?
Do you have a question about the VC9E31 and is the answer not in the manual?
Questions and answers