Process Related Faults And Messages - Miele PG 8581 Supplementary Document

6.5. Process Related Faults & Messages
Problem
Drying during programme
deactivated
Wrong code entered
Programme cancelled
Programme continued
All settings reset
All programme settings
reset
* The act of resetting causes the machine to lose critical data and so prevents it
22
Cause and remedy
Drying cannot be selected at the start of a programme because drying is not available for the
selected programme.
Start the programme without drying.
Or
Have the drying parameters for this programme adjusted by Eschmann
The code entered is not the same as the code saved.
Enter the code again.
Report the loss of the code to Eschmann
This is not a fault.
A programme which was running was cancelled by the user.
The wash cabinet can be very hot. When the door is opened,
hot steam and chemical agents can escape. Protective
measures for personal safety mast be observed.
This is not a fault.
The process of cancelling a programme was not completed.
The programme which was running continued without interruption.
This is not a fault.
A user has restored factory default settings.
Confirm the message with OK*.
This is not a fault.
A user has restored the factory default setting for the programme.
Confirm the message with OK*.
from cleaning effectively. Call Eschmann for advice.
WARNING!
PERSONAL INJURY HAZARD
MUW216743-2