User Maintenance; Routine Checks - Miele PG 8581 Supplementary Document

for this purpose.
5.

User Maintenance

The following need to be inspected:
– All filters in the wash cabinet

5.1. Routine Checks

– The spray arms in the machine and in any mobile units or baskets
Before the start of each working day the user must carry
– The wash cabinet and the door seal
out a number of routine checks including any Daily/Weekly
Testing (Refer to Appendix 5).
– The dispensing systems and
The following need to be inspected:
• All filters in the wash cabinet
– Mobile units, baskets, modules and inserts.
• The spray arms in the machine, and baskets
• The wash cabinet and the door seal
• The dispensing systems.
Cleaning the filters in the wash cabinet
Cleaning the filters in the wash cabinet
The filters in the floor of the wash cabinet prevent coarse
The filters in the floor of the wash cabinet prevent coarse soiling from
soiling from coming into contact with the circulation system.
Filters can become blocked by soiling, so they need to be coming into contact with the circulation system. Filters can become
checked every day and cleaned as necessary
blocked by soiling, so they need to be checked every day and
.
cleaned as necessary.
- CAUTION
This machine must have all filters in place
before being used.
 This machine must not be used without all the filters in place.
 Danger of injury from glass shards, needles etc which are
WARNING!
retained in the filter.
PERSONAL INJURY HAZARD
Danger of injury from glass shards & needles etc,

which are retained in the filter.
Turn the microfine filter in the direction of the arrow and remove it
Wear appropriate personal protective equipment.
together with the coarse filter.
1. Turn the microfine filter in the direction of the arrow and
remove together with the coarse filter.
2. Press the catches towards each other and pull the
coarse filter upwards and remove it.
3. Remove the fine filter which sits loosely between the
coarse filter and the microfine filter.
16

Press the catches towards each other
4. Remove the flat filter last.
upwards to remove it.
5. Clean the filters in the manual wash sink.
6. Re-insert the filter combination in the reverse order.

Remove the fine filter which sits loosel
Ensure:
• that the flat filter sits flat in the base of the wash
coarse filter and the microfine filter.
cabinet.
• that the coarse filter has securely clicked into
place in the microfine filter
• that the microfine filter is tightly screwed in as far
as it will go.
Cleaning the spray arms
The spray arms can become blocked, especially if the filters
are not inserted correctly in the wash cabinet. This can
cause coarse particles of soiling to get into the wash fluid
circulation.
Spray arms must be visually checked daily for soiling and
blocked jets, and for ease of turning.
- CAUTION
Immobile or blocked spray arms must not be used
again. In this case contact Eschmann for advice.

- CAUTION
Remove the flat filter last.
Do not allow any magnetic objects or wash items

to stick to the magnets on the spray arms.
Clean the filters.
Any metallic objects on the magnets can cause a

false reading of spray arm rotation.
Re-insert the filter combination in the r
Remove all metallic objects from the magnets.
– ... that the flat filter sits flat in the base
- CAUTION
Visible wear on the bearings can adversely affect
– ... that the coarse filter has securely cli
the long-term functioning of the spray arms. In this
case, contact Eschmann
microfine filter.
- CAUTION
– ... that the microfine filter is tightly scre
Some spray arms and baskets are marked with a
number. When refitting, ensure that the numbers
on the spray arms correspond with the numbers
on the baskets.
MUW216743-2