Advertisement
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTION
1. The unit should be securely mounted in a rigid framework.
NOTE: Allowing the fan frame to flex or move will result in excess
vibrations, which may cause possible premature motor, propeller, or
shutter failure.
2. Install any auxiliary components such as thermostats, switches, or speed
controls.
3. Connect power to the motor using an approved wiring method.
Refer to the following wiring diagram.
Fan frame and motor must be securely and adequately grounded
to a suitable electrical ground, such as a ground water pipe or
ground wiring system.
Wiring Diagram
Installation Diagram
Shutter Fan Models:
ILG8SF12V-1
ILG8SF10V-1
Fan Control Model：
ILG8SFST
4
Advertisement
