Advertisement
Advertisement
Table of Contents
Related Manuals for ML Accessories AXREMC
Summary of Contents for ML Accessories AXREMC
- Page 1 INSTALLATION & MAINTENANCE MANUAL AXREMC...
- Page 2 These instructions should be used to aid installation of the following products: AXREMC Note: To change the settings on the optional AXSMOD microwave sensor module, the AXREMC remote controller is required. AXREMC REMOTE CONTROL PROGRAMMER • Insert 2 x AAA batteries (not included) •...
- Page 3 Fig. 1 This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where facilities exist.
- Page 4 BUTTON FUNCTION Press the “ON/OFF” button, the light goes to constant on/off mode, sensor is disabled. Press “Reset” or “Sensor motion” button to quit from this mode and the sensor starts to work Press “Reset” button, all parameters are same as setting of DIP switch or factory settings.
- Page 5 ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve the right...
- Page 6 Supplied By: (UK) Manufacturer ML Accessories Ltd, Unit E Chiltern Park, Boscombe Road, Dunstable LU5 4LT, www.mlaccessories.co.uk (EU) Authorised Representative nnuks Holding GmbH, Niederkasseler Lohweg 18, 40547 Düsseldorf, Germany Email: eprel@nnuks.com AKAPR22_V1 ** Product designed for indoor use only...
Need help?
Do you have a question about the AXREMC and is the answer not in the manual?
Questions and answers