Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ML Accessories BATSCWMST4
Summary of Contents for ML Accessories BATSCWMST4
- Page 1 INSTALLATION & MAINTENANCE MANUAL BATSCWMST4 / BATSCWMST5 / BATSCWMST6...
-
Page 2: General Instructions
These instructions should be used to aid installation of the following products: BATSCWMST4 / BATSCWMST5 / BATSCWMST6 • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician •... - Page 3 Provide power to the required point of installation • • Squeeze the sides and hinge the diffuser away from the fitting (see Fig. 1) Fig. 1 k the location of the fixing holes and drill the holes ensuring not to infringe with any ga •...
- Page 4 Fig. 3 Fig. 3 • Select the required sensor settings (see below) Fig. 3 • Switch on and check for correct operation ensuring the green indicator LED is illuminated Select the required sensor settings (see below) • Select the required sensor settings (see below) •...
- Page 5 WARNING This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. GENERAL This product contains a light source of energy efficiency class D to Regulation (EU) No. 2019/2015 and (UK) 2021 No.
-
Page 6: Self-Test Function
SELF-TEST FUNCTION EST FUNCTION SELF-TEST FUNCTION When first connected to the mains supply, the fitting will carry out an initial 3-second function test. Any faults st connected to the mains supply, the fitting will carry out an initial 3-second function test. Any faults will When first connected to the mains supply, the fitting will carry out an initial 3-second function test. - Page 7 If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML...
-
Page 8: Warranty
If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. - Page 9 simulate a mains supply failure for 3-hour continuous test by operation of key switch, or switching off circu breaker. Ensure normal supply is restored after test and check status of bi-colour LED indicator • If the luminaire fails any of the above tests, please contact a qualified electrician. Results should be recorded, even when obtained via the self-test function.
- Page 10 Supplied By: (UK) Manufacturer ML Accessories Ltd, Unit E Chiltern Park, Boscombe Road, Dunstable LU5 4LT, www.mlaccessories.co.uk (EU) Authorised Representative nnuks Holding GmbH, Niederkasseler Lohweg 18, 40547 Düsseldorf, Germany, Email: eprel@nnuks.com ~50°C DCAPR22_V1...
Need help?
Do you have a question about the BATSCWMST4 and is the answer not in the manual?
Questions and answers