Advertisement
Advertisement
Table of Contents
Related Manuals for ML Accessories BT ACT Series
Summary of Contents for ML Accessories BT ACT Series
- Page 1 INSTALLATION & MAINTENANCE MANUAL BTxxACT...
- Page 2 GENERAL INSTRUCTIONS These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: BT9ACT / BT14ACT / BT20ACT SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
- Page 3 (BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician (BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician Please isolate mains prior to installation or maintenance Please isolate mains prior to installation or maintenance •...
- Page 4 Mark the location of the fixing holes, and drill the holes ensuring not to infringe with any gas/water • pipes or electrical cables Feed the cable via the rubber grommet to retain IP rating, and secure the baseplate to the surface •...
- Page 5 WARNING This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. GENERAL This product contains a light source of energy efficiency class D (BT9ACT) / E (BT14ACT, BT20ACT) to Regulation (EU) No.
- Page 6 ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve the right to alter product specification without prior notice. INTERNATIONAL CONTACT DETAILS ML Accessories Limited LU5 4LT www.mlaccessories.co.uk...
Need help?
Do you have a question about the BT ACT Series and is the answer not in the manual?
Questions and answers