Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for ML Accessories FLP Series
Summary of Contents for ML Accessories FLP Series
- Page 1 INSTALLATION & MAINTENANCE MANUAL FLPxx...
- Page 2 GENERAL INSTRUCTIONS These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: FLP100 / FLP100A / FLP150 / FLP150A / FLP200 / FLP200A SAFETY •...
- Page 3 FLPxxxx These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: INSTALLATION FLP100 / FLP100A / FLP150 / FLP150A / FLP200 / FLP200A SAFETY Note - If this luminaire is being used in conjunction with an external PIR or sensor, please •...
- Page 4 • Feed the cable through the compression gland on the rear of the access plate. A drip loop should be left on the incoming mains cable (see Fig. 2) Fig. 2 Fig. 2 Fig. 2 • Connect the luminaire to the mains supply ensuring the correct polarity is observed: Connect the luminaire to the mains supply ensuring the correct polarity is observed: L - Live (brown •...
- Page 5 WARNING This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. This product is not suitable for installation in or near a coastal or marine environment. GENERAL •...
- Page 6 ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve the right to alter product specification without prior notice.
Need help?
Do you have a question about the FLP Series and is the answer not in the manual?
Questions and answers