Roland Camm-3 PNC-3200 Programmer's Manual page 60

Miscellaneous Functions (M Functions)
Code Functions
Program stop
M 00
Optional stop
M 01
End of program
M 02
Spindle start
M 03
Spindle stop
M 05
Tool Change
M 06
End of program
M 30
Subprogram Call
M 98
End of subprogram
M 99
M00, M01, M02, M30, M98, M99 should be specified in a discrete block.
Do not include any other words or code in the block containing these.
Spindle speed Functions (S Functions)
The setting made on the PNC-3200 determines whether the operation is performed simultaneously with specification or after completion
of the block in which the specification is made.
Feed Functions (F Functions)
The setting made on the PNC-3200 determines whether the operation is performed simultaneously with specification or after completion
of the block in which the specification is made.
58
Function start
Functions after
completion of the
Functions when
block in which
specified
specified
*
*
*
*
*
*
*
Function continue
Maintained until
canceled or
changed
* : Operation is according to the setting on the PNC-3200.
Effective only
within the block in
which specified