Optional Block Skip; Or Er Program Start - Roland Camm-3 PNC-3200 Programmer's Manual

Nc code

Hide thumbs Also See for Camm-3 PNC-3200:

Table of Contents

Format

/ number

Description

This function makes it possible to skip over a desired block within a program. Optional block skip is specified at the start of the block.

•••••••••

G01Z-7.0

G01Y35.0

/M98P0002

G03X15.0Y-15.0I15.0

•••••••••

Enter a "/" (slash) at the start of the block.

The setting for enabling or disabling block skip is made on the PNC-3200. (Refer to "User's Manual 3 -- Cutting Using NC Codes.")

% or ER

Format

% (ISO or ASCII code)

(EIA code)

Description

A block containing only a "%" must appear at the start of the data. No other word should be specified within a block in which "%" or "

ER " is specified. This notifies the machine of the start (or end) of the data. When it is present at the end of the data, its effect varies

according to the data-transmission method. When data is temporarily saved in the PNC-3200's buffer ("Edit"), data registration ends

automatically. When cutting is performed as data is being received ("Execute Cutting"), it is ignored. The data start character is "%" if

ISO or ASCII is in use as the character code system, of " ER " if EIA is in use.

Be sure to specify either "%" or " ER " at the beginning of the program. All programs are ignored until the data start is specified.

Optional Block Skip

Subprogram call is skipped (not called)

Program Start

Table of Contents