Appendix D: Specifications - Linksys WAP200E User Manual

Linksys wap200e access point: user guide
Hide thumbs Also See for WAP200E:
Table of Contents

Advertisement

Appendx D
Appendx D:
Specfcatons
Specficatons
Model
WAP200E
Standards
IEEE802.11g, IEEE802.11b,
IEEE802.3, IEEE802.3u,
IEEE802.3af (Power Over
Ethernet), 802.1p (QoS
priority), 802.1Q (VLAN), 802.1X
(Security Authentication),
802.11i - Ready (Security
WPA2), 802.11e - Ready (WMM
& U-APSD), 802.11F (Wireless
Roaming)
Ports
1 Ethernet, 1 External Antenna
Buttons
Reset
Cabling Type
UTP CAT 5
LEDs
Power, Ethernet, Wireless
Operating System
Linux
Management
SNMP Version
1, 2 and 2c
Operatng Modes
Access Point
Access Point Mode,
point-to-point Bridge Mode,
point-to-multipoint Bridge
Mode, Repeater Mode
Wreless
Spec/Modulation
802.11b/DSSS, 11g/ODFM
Data Rates
11b: 1, 2, 5.5, 11 Mbps,
11g: 6, 9, 11, 12, 18, 24, 36, 48,
54 Mbps
Channels
11 North America,
13 Europe (ETSI and Japan)
Auto-channel selection
# of Internal Ant.
2x 6dBi (directional)
Ant. connector type
Reverse Polarity Female N-type
Detachable y/n/na
y (sold separately)
RF Pwr (EIRP) in dBm
11.g: Typical - 16.5dBm,
11.b: Typical - 17dBm
Antenna Gain in dBi
Internal antenna: 6dBi
Adjustable power
y
Receiver Sensitivity
11.g: 54Mbps@ -65dBm,
11.b: 11Mbps@ -85dBM
Wreless-G Exteror Access Pont wth Power Over Ethernet
Securty
WEP/WPA/WPA2
WEP, WPA-PSK, WPA2-PSK,
WPA-ENT, WPA2-ENT
Connection Control
Wireless Connection Control:
MAC-Based
SSID Broadcast
SSID Broadcast Enable/Disable
802.1X
IEEE 802.1X support
Wireless Client Isolation Wireless Client devices can
be isolated from each other
either within an SSID or
between two SSIDs.
Both isolation modes can be
enabled in the same time.
Web-based Utility
Access Control
HTTP/HTTPS, wireless client
web GUI access control
Wreless Securty
WEP bits
64, 128
WPA bits & params
128 - TKIP/AES
WPA2 bits & params
256 - AES
SSID Broadcast on/off
Yes
Client Isolation
Yes
MAC-based Wireless
Connection Control
Yes
Wireless Web GUI
Access on/off
Yes
Qualty of Servce
QoS
4 queues
WMM wireless traffic
prioritization
General
Wireless roaming based on
IAPP (802.11F)
Load Balancing
Auto-channel selection
Specifications


Advertisement

Table of Contents
loading

Table of Contents