Table of Contents
Advertisement
Product Overview
Chapter
Radio Coverage of the Access Point to Client Devices
When using the Access Point to connect client devices,
adjust it so the client devices are on the same horizontal
plane as the Access Point and within a 3dB angle of
50 degrees. This will ensure the strongest signal and
maximum reach.
If the Access Point is used inside a building, put it in a
corner of the building for maximum coverage.
Access Point to Access Point (bridging) Radio Coverage
If the Access Point is used as a bridge or repeater, adjust
the Access Points so they face each other, this will ensure
the strongest signal and maximum reach.
Make sure that the orientation of the two Directional
Antennas is the same. The radio wave is polarized so a 90
degree rotation will result in no received power.
Due to its directional characteristics, the internal antenna
is ideal for point-to-point bridge mode or the spoke
side of point-to-multipoint bridge mode. An external
omni-directional antenna (e.g. HGA9N) is recommended
for repeater mode applications.
Wreless-G Exteror Access Pont wth Power Over Ethernet
Advertisement
Table of Contents
