Table of Contents
Advertisement
Chapter
Administration > Reboot
On this screen you can reboot the Access Point.
Administration > Reboot
Reboot
This feature is useful when you need to remotely reboot
the Access Point.
Devce Reboot
To reboot the Access Point, click the Yes
option.
Click Save Settngs to apply your change and the Access
Point will reboot itself, or click Cancel Changes to cancel
your change. Help information is available on the right
side of the screen.
Administration > Config Management
On this screen you can create a backup configuration file
or save a configuration file to the Access Point.
Administration > Config Management
Wreless-G Exteror Access Pont wth Power Over Ethernet
Advanced Configuration
Config Management
Use this screen to upload or download configuration files
for the Access Point.
Save Confguraton
To save a backup configuration file
on a computer, click the Save Configuration to File button
and follow the on-screen instructions.
Restore Confguraton
To upload a configuration file to
the Access Point, enter the location of the configuration
file in the field provided, or click the Browse button to find
the file. Then click the Load button.
Help information is available on the right side of the
screen.
Status > Local Network
The Local Network screen displays the Access Point's
current status information for the local network.
Information
Hardware Verson
This is the version of the Access Point's
current hardware.
Software Verson
This is the version of the Access Point's
current software.
Local MAC Address
The MAC address of the Access
Point's Local Area Network (LAN) interface is displayed
here.
System Up Tme
This is the length of time the Access
Point has been running.
Local Network
IP Address
This shows the Access Point's IP Address, as it
appears on your local network.
Advertisement
Table of Contents
