Status > Wireless; Wireless Network; Status > System Performance; System Performance - Linksys WAP200E User Manual

Chapter 
Subnet Mask This shows the Access Point's Subnet
Mask.
To update the status information, click the Refresh
button. Help information is available on the right side of
the screen.
Status > Wireless
The Wireless screen displays the Access Point's current
status information for the wireless network(s).
Status > Wireless

Wireless Network

Mode The Access Point's wireless network mode is
displayed here.
SSID - MAC Address
The MAC Addresses of the Access
Point's wireless interfaces are displayed here.
SSID - The Access Point's SSIDs that have been
configured are displayed here.
Channel The Access Point's Channel setting for the SSID
is shown here.
VLAN Trunk The VLAN Trunk Status is displayed here.
Prorty Settng The priority setting status is displayed
here.
To update the status information, click the Refresh
button. Help information is available on the right side of
the screen.
Wreless-G Exteror Access Pont wth Power Over Ethernet
Advanced Configuration
Status > System Performance
The System Performance screen displays the Access
Point's status information for its current settings and data
transmissions.
Status > System Performance

System Performance

Wired
Name This indicates that the statistics are for the wired
network, the LAN.
IP Address The Access Point's local IP address is displayed
here.
MAC Address This shows the MAC Address of the Access
Point's wired interface.
Connecton This shows the status of the Access Point's
connection for the wired network.
Packets Receved This shows the number of packets
received.
Packets Sent This shows the number of packets sent.
Bytes Receved This shows the number of bytes
received.
Bytes Sent This shows the number of bytes sent.
Error Packets Receved This shows the number of error
packets received.
Drop Receved Packets
This shows the number of
packets being dropped after they were received.