Client Setup - Linksys PCMLM56 User Manual

Windows 98

Client Setup

Before enabling File and Printer Sharing, you should
prepare your computer to be used with any file servers
that may be on the network.
If you are not using Windows 98 with an NT or
NetWare file server, skip the next two paragraphs.
Otherwise:
• Using the Card to Connect to a NetWare 3.x File
Server
Click on My Computer, Control Panel, and Network.
Change the Network Logon to Client for NetWare
Network. Next, double-click on the Client for NetWare
networks. Put your server's name in the Preferred Server
box. Click in the Enable Logon Script Processing box.
Click on OK and restart your PC.
Note: This method is effective for NetWare 3.11 and
3.12 servers. for NetWare 4.x or higher, you should
obtain and use Client32 instead.
• Using the Card to Connect to a Windows NT
Domain
Click on My Computer, Control Panel, and Network.
Change the Primary Logon to Client for Microsoft
Network. Double-click on the Client for Microsoft net-
works. Check the Log into Windows NT domain box.
Put your NT domain name in the Windows NT domain
area. Click on OK and restart your PC.
Continue with the installation instructions that appear
on your screen, if any. When you're finished, restart
your computer.
23